Ducati MULTISTRADA V25 Owner'S Manual Download Page 337

Page: 337 / 400

Attention

Avoid the use of steam, fuel, solvents, hard

brushes or other methods that could damage the O-

rings; also avoid direct contact with the battery acid

as it could cause mini cracks in the links as shown in

the figure.

Attention

In particular, in case of Off-Road use of the

bike, it is possible that excessive wear of the links

occurs due to the contact with the chain sliding shoe;

friction could in fact cause the chain to overheat,

altering the heat treatment of the links and making

them particularly fragile.

Checking the sliding shoe

Check the wear of the sliding shoe (3) and, if

necessary, contact a Ducati Dealer or Authorised

Service Centre.
Checking the tension

Check the chain tension (4) as indicated in the sub-

section “Checking the drive chain tension”.

Have the chain tension adjusted by a Ducati Dealer

or authorised Service Centre.

336

Downloaded from

ManualsNet.com

search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands

Ducati MULTISTRADA V25, Owner'S Manual

Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands