manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 188

Tips on how to select the sensitivity level

Attention

Excellent operation of the ABS system, for all

available levels, is ensured only with the OE brake

system and with OE tyres and/or with the ones

recommended by Ducati. In particular, OE Tyres for

this motorcycle are Pirelli Scorpion Trail II in the

following sizes: 120/70 ZR19 at the front, 170/60

ZR17 at the rear. The use of tyres of different size and

characteristics to the original tyres and/or those

recommended by Ducati may alter the operating

characteristics of the system thus making it unsafe.

It is recommended not to install tyres of different

size than the ones approved for your vehicle.
Selecting level 3, the ABS will ensure a very stable

braking thanks to lift-up control and front-to-rear

combined braking, and the motorcycle will keep a

good alignment during the whole braking action.

ABS level 3 features active cornering function which,

with vehicle leaning over, prevents wheel lockup and

skidding as much as possible, within the physical

limits allowed by the vehicle and by the road

conditions.

Selecting level 2, the ABS will privilege more and

more the braking power rather than stability and lift-

up control, which is disabled in level 2. Level 2

provides for the front-to-rear combined braking and

the cornering function.
ABS level 1 is specific for off-road use and ABS is

active only on the front wheel to help braking

performance on dirt roads. In this level there is no

lift-up control, neither front-to-rear combined

braking, nor cornering function.
The choice of the correct level mainly depends on

the following parameters:

1) The tyre/road grip (type of tyre, amount of tyre

wear, the road/track surface, weather

conditions, etc.).

2) The rider's experience and sensitivity: expert

riders can tackle a lift-up in trying to reduce the

stopping distance to a minimum, while less

expert riders are recommended to use setting 3,

that will help them keeping the motorcycle more

stable even in emergency braking.

187

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands