Ducati MULTISTRADA V25 Owner'S Manual Download Page 220

Page: 220 / 400

ABS enabling/disabling

This function allows disabling or enabling the ABS

system without entering the Setting Menu.

Note

“Manual” disabling and enabling of the ABS is

only possible in ENDURO Riding Mode.
If the ABS is enabled, the instrument panel shows

“ABS ON”.

Once "ABS ON" is displayed, press button (4) to

disable the ABS.

Note

Vehicle speed must be below or equal to 5 km/

h (3 mph) for activating the ABS disabling procedure;

if it is not so, you can only scroll the functions of the

Menu using buttons (1) and (2).
After pressing button (4) within the Menu, “WAIT …”

is displayed (instead of “ABS ON) for 2 seconds.

During this time, Menu scrolling via buttons (1) and

(2) is disabled.

When the system is disabled, “ABS OFF” is

displayed, the ABS warning light turns on to indicate

that the ABS is disabled and buttons (1) and (2) are

enabled.

If the ABS is disabled, the instrument panel shows

“ABS OFF” and ABS light on. Once "ABS OFF" is

displayed, press button (4) to enable the ABS.

Note

Vehicle speed must be below or equal to 5 km/

h (3 mph) for activating the ABS enabling procedure;

if it is not so, you can only scroll the functions of the

Menu using buttons (1) and (2).
After pressing button (4) within the Menu, “WAIT …”

is displayed (instead of “ABS OFF) for 2 seconds.

MENU

ABS

SETTING

FRONT

TIRE

2.5

REAR

TIRE

2.5

Fig 173

219

Downloaded from

ManualsNet.com

search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands

Ducati MULTISTRADA V25, Owner'S Manual

Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands