Ducati MULTISTRADA V25 Owner'S Manual Download Page 175

Page: 175 / 400

Engine Coolant temperature

The instrument panel receives information about

the engine temperature (already calculated in °C)

and displays the value in the set unit of

measurement (°C or °F), followed by the unit of

measurement and the engine temperature symbol.

The temperature display range goes from 40 °C to

+120 °C (+104 °F ÷ +248 °F).

If reading is:

●

<= (lower than or equal to) -40 °C (-40 °F), a

string of flashing dashes " - - - " is displayed;

●

within the range -39 °C (-38 °F) to +39 °C

(+102 °F), "LO " is displayed steadily;

●

within the range +40 °C (+104 °F) to +120 °C

(+248 °F), the value is displayed steadily;

●

>= (higher than or equal to) +121 °C (+250 °F),

"HI" is displayed flashing and in red and

Temperature symbol is steady and red.

If the coolant temperature sensor is in fault, a string

of flashing dashes "- - -" is displayed with the set unit

of measurement and the MIL light turns on.

If the instrument panel is not receiving coolant

temperature value, a string of steady dashes "- - -" is

displayed, followed by the unit of measurement.

Note

If the instrument panel does not receive any

information on the unit of measurement, the default

unit of measurement is displayed flashing.

2538

LAP

DQS
DTC

UP/DW

ABS

SPORT

10:22

P.M.

RPM x 1000

GEAR

Km/h

°C

TOT

299

260

MENU

13.5

Km/l

SETTING

RANGE

CONS

AVG1

Fig 149

174

Downloaded from

ManualsNet.com

search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands

Ducati MULTISTRADA V25, Owner'S Manual

Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands