manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 148

Attention

Although combined braking is available (rear

brake activation when rider uses only the front

brake), using the two brake controls separately

reduces the motorcycle braking power.

Never use the brake controls harshly or suddenly as

you may cause rear wheel lift-up and lose control of

the motorcycle.

When riding in the rain or on slippery surfaces,

braking will become less effective. Always use the

brakes very gently and carefully when riding under

these conditions. Any sudden manoeuvres may lead

to loss of control. When tackling long, high-gradient

downhill road tracts, shift down gears to use engine

braking. Apply one brake at a time and use brakes

sparingly. Keeping the brakes applied all the time

would cause the friction material to overheat and

reduce braking power dangerously. Underinflated

and overinflated tyres reduce braking efficiency,

handling accuracy and stability in a bend.

147

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands