manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 198

Changing motorcycle Load Mode setting

This function allows changing the motorcycle load

setup under static and dynamic conditions, thereby

modifying the suspension setup within the current

Riding Mode.

Available settings are as follows:

●

Rider only (Rider)  

 ;

●

Rider with luggage (Rider / Baggage)  

  

 ;

●

Rider and passenger (Rider / Passenger)

 

  

 ;

●

Rider with passenger and luggage (Rider /

Passenger / Baggage)  

  

  

 .

Attention

Ducati recommends changing the load mode

when the motorcycle is stopped. If the load mode is

changed while riding, be very careful (it is

recommended to change the Riding mode at a low

speed).
Every load setup is associated with a specific front

fork rebound and compression damping, a specific

rear shock absorber rebound and compression

damping as well as a specific rear shock absorber

spring preload that changes according to the Riding

Mode.

Press button (2) for one second to activate the load

mode function menu.

Now you can use buttons (1) and (2) to scroll down the
suspension settings and select “ 

  EXIT”.

Press button (4) to confirm the desired setting; then,

the instrument panel quits the display mode and

saves the new setting.

If you press button (4) just once with the indication
“ 

  EXIT” selected, the instrument panel quits

without applying any change.

Rider / Passenger/Baggage

Rider / Passenger

Rider / Baggage

Exit

Driver

Sport

299

km/h

Fig 157

197

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands