manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 352

Attention

The headlight might fog up due to washing,

rain or moisture. Switch headlight on for a short time

to help and dry up any condensate.
Carefully clean the phonic wheels of the ABS in order

to ensure system efficiency. Do not use aggressive

products in order to avoid damaging the phonic

wheels and the sensors.

Attention

Avoid direct contact between instrument panel

lens and oils/fuels that may stain or damage it

thereby impairing information readability. To clean

such parts, do not use alcohol-based detergents,

containing solvent or abrasive agents; do not use

sponges or cloths featuring hard or rough areas since

they might scratch the surface.

Note

Clean instrument panel lens using soft cloths

with water and mild soap or detergents specific for

cleaning clear plastic parts.

Note

To clean the instrument panel do not use

alcohol or its by-products.

Pay special attention when cleaning the wheel rims

since they have parts in machined aluminium; clean

and dry them every time you use the vehicle.

Important

To clean and lubricate the drive chain, refer to

the paragraph “Lubricating the drive chain”.

351

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands