manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 73

To ensure trouble-free operation of the side stand

joint, thoroughly clean it and then use SHELL

Alvania R3 grease to lubricate all friction points.

Attention

Do not sit on the motorcycle when it is

supported on the side stand.

Note

Check for proper operation of the stand

mechanism (two springs, one into the other) and the

safety sensor (2) at regular intervals.

Note

The engine can be started with the side stand

down and the gearbox in neutral. If starting with a

gear engaged, pull in the clutch lever (in this case the

side stand must be up).
The instrument panel receives information on side

stand status and if side stand is down/open, the icon

"SIDE STAND" is displayed on a red background.

In case of side stand sensor fault, the instrument

panel will display the stand down/up indication with

MIL light on.

If instrument panel does not receive side stand

status, stand down/open “SIDE STAND” indication

will flash to indicate an undefined status.

72

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands