manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 219

Tyre deflation pressure indication

(TIRE PRESSURE) - accessory

This function is available only if the tyre pressure

sensor accessory has been installed. The function

shows the front and rear tyre pressure values.

Note

The TPMS sensor (TIRE PRESSURE) detects

the tyre deflation.
The messages “FRONT TIRE” and “REAR TIRE” are

displayed together with the detected pressure

values of the front and rear tyre respectively.

The tyre pressure values are expressed in bar.

Note

The steady on dashes “-.-” are displayed in

these cases:

●

if the instrument panel does not receive valid

pressure information for the front and/or rear

tyre;

●

if one or both tyre sensors are off.

Note

If one or both tyre sensors are in “alarm”, the

instrument panel shows the flashing value or the

blinking dashes “-.-”.

Important

Ducati recommends that the values to be set as

a reference for the tyre pressure sensors are entered

as specified in paragraph “Tubeless Tyres” and

“Tyres”.

Every time you replace the tyres, set the pressure

values by respecting what Ducati specifies in

paragraph “Tubeless Tyres” and “Tyres”.

LAST CALLS

FRONT

TIRE

2.5

REAR

TIRE

2.5

ABS

OFF

1

4

2

Fig 172

218

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands