manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 174

Fuel level

This function displays the fuel level.

The low fuel light turns on when the level goes down

to 2 steady marks that become orange, the fuel

pump symbol is orange: this means that there are

approximately 4 litres left in the tank.

If the level goes further down, the last mark will be

red and flashing and the fuel pump symbol will be

steady and red.

Note

In case of fault or error of the fuel level sensor,

no level marks will be displayed, the fuel pump

symbol will be red and flashing, and the Generic

Error warning light will be on.

Important

If the vehicle enters the reserve status and the

light has turned on, it is recommended to turn the

vehicle off when refuelling (Key-Off); if fuel is added

without turning it off (Key-On and engine off) the

data may not be immediately updated.

6

2538

LAP

LO

DQS
DTC

5

UP/DW

3

ABS

11

SPORT

10

9

8

7

6

5

2

3

4

1

10:22

P.M.

RPM x 1000

GEAR

Km

Km/h

°C

TOT

299

260

MENU

13.5

Km/l

Km

SETTING

RANGE

CONS

AVG1

Fig 148

173

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands