Ducati MULTISTRADA V25 Owner'S Manual Download Page 303

Page: 303 / 400

Heated handgrips

This function allows enabling and adjusting the

heated handgrips only if these are installed.

When heated handgrips are installed, the

instrument panel displays the function by means of

a symbol and the set level (OFF, LOW, MED, HIGH).
Press button (12) to adjust.

Each time you press button (12), you scroll the

setting through “OFF”, “LOW”, “MED”, “HIGH” and

then return to “OFF”.

The heated handgrips actually warm up when the

engine is started and the icon corresponding to the

set level is activated.

Note

The heated handgrips are actually "on"

(heating) only when engine is running.
Level setting with Heated Handgrips "on": when

setting LOW, MED or HIGH level, the icons will have

the following background colours (for both DAY and

NIGHT backlighting options of the instrument

panel):

●

GREEN for LOW;

●

YELLOW for MED;

●

RED for HIGH.

Level selection with Heated Handgrips "off": Even if

heated handgrips are turned off, it is still possible to

set them to LOW, MED or HIGH level, but the icon

will have a white background in DAY backlighting

option of the instrument panel, or black in NIGHT

backlighting option of the instrument panel.

Note

In case of Battery-Off, upon the following

Battery-On / Key-On, the Dashboard sets this

function by default to "OFF".

HIGH

10:22

2538

DQS
DTC

UP/DW

ABS

URBAN

P.M.

GEAR

°C

TOT

Km / h

260

MENU

13.5

Km/l

SETTING

RANGE

CONS

AVG1

Fig 268

302

Downloaded from

ManualsNet.com

search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands

Ducati MULTISTRADA V25, Owner'S Manual

Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands