Instructions for use Fabius plus SW 3.n
63
Assembly and preparation
3
Empty used soda lime and dispose of
according to the instructions for use.
4
If it is necessary to clean the absorber insert
(C), remove the absorber insert from the
absorber container. Leave the inner and outer
sealing rings on the absorber insert.
Filling and mounting
1
After any cleaning, push the absorber insert
back into the absorber container (D)
completely.
2
Fill CO
2
absorber with fresh soda lime to the
upper mark.
Dräger recommends the use of
Drägersorb 800 Plus or Drägersorb FREE.
If conventional, non-pelletized soda lime is used,
then a soda lime dust filter
*
must be used.
3
Insert a new soda lime dust filter (E). Only use
soda lime dust filters indicated in the list of
accessories.
Only use undamaged filters, as exterior
damage to the filter decreases protection!
4
Place the CO
2
absorber (F) below the compact
breathing system in position and turn
counterclockwise to the final position stop.
21022
21021
C
D
WARNING
Risk of hypoventilation
Reuse of the soda lime dust filter can
increase filter resistance and impair the
ventilation function of Fabius.
Replace the soda lime dust filter each time
the soda lime is replaced.
NOTE
Make sure that no soda lime residues are
between the seals and the seal surfaces. This
type of residue can cause system leakages.
*
optional
20977
E
F