233
International roaming
After returning to Japan
When you return to Japan, the terminal is
connected to DOCOMO network
automatically. If connection is failed, perform
the following operations.
･
Set "Network Mode" to "LTE (preferred)/
WCDMA/GSM" (P.234).
･
Set "Search mode" to "Automatic" in "Service
providers" settings (P.233).
When you start the international roaming or
move out of your operator's network, you
need to reconnect the terminal to another
available network.
❖
Information
･
Some applications automatically perform packet
communications. To disconnect packet
communication manually, from the Home screen,
tap
and tap [Settings]
u
[More...]
u
[Mobile
networks] and unmark "Data enabled".
Confirming and switching the
network search mode
By default, network search mode is set to
"Automatic". When you connect manually to
an overseas network operator conducted in
flat-rate service, confirm the search mode
with the following operations and switch to
"Manual".
1
From the Home screen, tap
,
then tap [Settings].
2
Tap [More...]
u
[Mobile
networks]
u
[Service providers].
･
If a note appears, tap [OK].
3
Tap [Search mode]
u
[Manual].
4
From "AVAILABLE NETWORKS",
mark a network to use.
･
To display available networks, tap
[Search networks].
❖
Information
･
If you set a network manually, the terminal is not
reconnected to another network automatically even
if you move out of the network area.
･
To return to "Automatic", tap [Automatic] in
Step 3.
Making setting for
international use
Summary of Contents for SO-01E
Page 1: ...12 11 INSTRUCTION MANUAL...
