Docomo SO-01E, Instruction Manual

Page: 173 / 284

171 Applications
1
From the Home screen, tap
then tap [Osaifu-Keitai].
2
Select a service you want to use
from a service list.
･
Download an application compatible
with service site or service.
･
You can exchange data with an IC card
reader only by holding
mark over
the card reader.
❖
Information
･
If you do not make the initial setting for Osaifu-Keitai
in the initial setting for DOCOMO services (P.40), the
initial setting screen appears in Step 1. Follow the
onscreen instructions.
･
You can scan and write data to or from an IC card
reader without activating Osaifu-Keitai compatible
application.
･
The function is available even if the terminal is off,
but it is not available when the battery pack is not
attached. Even if the battery pack is attached, the
function may not be available when you leave the
terminal off for a long time or the battery level is low,
etc.
･
You can use Osaifu-Keitai compatible service even
when the PIN code cannot be unlocked or PIN
locked.
･
Note that when you do not subscribe sp-mode,
some functions of Osaifu-Keitai compatible service
may not be available.
1
From the Home screen, tap ,
then tap [Settings]
u
[More...].
2
[NFC/Osaifu-Keitai
settings]
u
[Reader/Writer,
P2P]
u
[OK].
･
"Reader/Writer, P2P" and "Android
Beam" are marked.
･ Reader/Writer, P2P function is enabled,
and
appears in the status bar.
3
Hold the mark over a device
with the NFC module or a smart
poster.
One-touch function is an original function
developed by Sony based on NFC
technology. You can send/receive data to/
from a device with NFC such as a mobile
phone. If you use the one-touch function
with a Sony product with NFC, simple
operations allow you to send or receive
images, music, photos or videos taken with
the terminal.
Using "
おサイフケータイ対応サー
ビス
(Osaifu-Keitai compatible
service)"
Using "
かざしてリンク対応サービ
ス
(Kazashite-Link compatible
service)"
Sending/Receiving data by
one-touch function