Docomo SO-01E, Instruction Manual

Page: 34 / 284

32 Before Using the Terminal
1
Insert the tip of your finger into
the groove at the bottom of the
terminal, and lift up the back cover
(P.26).
2
Remove the battery pack and
microSD card, place the tip of your
finger on the projection (
) at the
edge of the tray, and pull out the
tray straight, then insert your
docomo mini UIM card into the
tray, with the metal (IC) part
facing down, and then press the
tray with the docomo mini UIM
card straight to the end.
･
Check the orientation of corner cut.
3
Install the battery pack and
microSD card, then attach the back
cover, then make sure there are no
gaps (P.26).
1
Remove the back cover, the
battery pack and microSD card,
hook the tab (
) on the tray with
the tip of finger to pull out the tray
straight, then take out the docomo
mini UIM card.
2
Press the tray straight to the end,
and install the battery pack and
micro SD card, then attach the
back cover, and then make sure
there are no gaps (P.26).
Inserting docomo mini UIM
card
T ray
Corner cut
docomo mini UIM card
Removing docomo mini UIM
card
T ray
docomo mini UIM card