Dini Argeo 3590 EBOX Series Technical Manual Download Page 23

Page: 23 / 132

3590EKR, 3590EXP, 3590EXT, 3590 EBOX, CPWE, CPWET series indicator E-AF03_05.01_14.07_EN_T.doc

<< F.ModE >> SCALE FUNCTIONING

<< En.kEyS >>

KEYS ENABLING

It is possible to enable/disable each single key of the keyboard:

- select the desired key with

- press

ENTER

to modify the setting:

- Press

to select “ENABLED” or “DISABLED” and

ENTER

to confirm.

QUICK FUNCTION RECALL THROUGH 999 + 123 + Fn

If the function 123 + Fn is not enabled, is possible directly recall the desired function with the keys combination 999 +
123 + Fn in weighing phase.

NOTES:

It’s possible to enable/disable all the keys together, by selecting “ENABLE ALL” or “DISABLE ALL” (the
confirmation will be requested with the message “SURE?”).

The disabling of the keys will have effect only the WEIGHING PHASE, in other words, not inside the menus,
databases, etc…

The turning off of the instrument (long pressing of the

key) will always be enabled.

The disabling of the keys will be applied also on the PC keyboard, if connected.

(!) ENABLE ALL

○ DISABLED

● ENABLED

ENABLED

Status

Key

Summary of Contents for 3590 EBOX Series





































































































































Search results

Summary of Contents for 3590 EBOX Series

Reviews:

Brands by name

Popular brands

Dini Argeo 3590 EBOX Series, Technical Manual

Search results

Summary of Contents for 3590 EBOX Series

Reviews:

Brands by name

Popular brands