3590EKR, 3590EXP, 3590EXT, 3590 EBOX, CPWE, CPWET series indicator E-AF03_05.01_14.07_EN_T.doc
119
485
PRINTS OPERATION SYMBOL
X
In which X is “+” in case of addition, “-“ in case of subtraction, “x” in case of multiplication.
The 482, 483, 484 and 485 blocks refer to the operation executed with the “calculator” function described in section
15.1
,
USER MAN.REF.
486
PRINTS CONDITIONED ADDITIONAL TARE
+PT
bbbbbbbbbbb
XXXX T
487
JUST ADDITIONAL TARE VALUE
XXXXXXXX
488
JUST 3
rd
CUSTOMER CONDITIONED DESCRIPTION
XXXXXXXXXXXXXXXXXXX T
in which XXXXXXXXXXXXXXXXXXXX are the 25 description characters; just the entered characters are printed,
expanding from left to right. This block can be printed only once, in input or in output.
489
JUST 3
rd
HEADING CONTINGENT ON CUSTOMER
DESCRIPTION3
490
JUST 3
rd
CUSTOMER DESCRIPTION
XXXXXXXXXXXXXXXXXXXXXXXXX
in which XXXXXXXXXXXXXXXXXXXX are the 25 description characters; just the entered characters are printed,
expanding from left to right; if the material is not selected, the block is ignored. The block is printed only once,
either in input or output.
509
PRINT ONLY WEIGHT INPUT OR OUTPUT AT DEPENDING ON DIRECTION
XXXXXXXX
510
PRINT THE BIGGEST ONE WEIGHT
XXXXXXXX
between weigh in input – output (always gross)
511
PRINT THE SMALLEST ONE WEIGHT
XXXXXXXX
between weigh in input – output (always tare)
512
PRINT THE BIGGEST ONE WEIGHT
XXXXXXXX
between weigh in input – output for the second weight (always gross)
513
PRINT THE SMALLEST ONE WEIGHT BETWEEN
XXXXXXXX
between weigh in input – output for the second weight (always tare)
9.4 BLOCKS WITH PARAMETERS
When entering the following blocks manually in a print ticket, these require that an additional numeric value be entered
(specified in detail in the block’s description) in order to define the print ticket which one wants to obtain.
EXAMPLE
Entry of the 600 “PRINT n TERMINATORS” block:
-
Enter the 600 block in a ticket and confirm with OK/menu.
-
The indicator does not pass by the block present in the following line, but shows “P
000”.
-
Enter a value between 001 and 050; for values outside this interval the indicator shows “-Error-”, restoring the block
before entering the block 600.
-
By entering a valid value, the block will print a number of terminators equal to the one previously entered.
600
PRINTS n TERMINATORS
Values valid from 001 to 050
601
PRINTS n LF CHARACTERS
Values valid from 001 to 050
602
PRINTS n TAB CHARACTERS
Values valid from 001 to 050
603
PRINTS n SPACE CHARACTERS
Values valid from 001 to 050
604
PRINTS n “_” CHARACTERS
Values valid from 001 to 050
605
LEFT MARGIN FOR LX300
Values valid from 001 to 255
606
NET WEIGHT ON X DIGITS
Valid values in the
nXX
format
607
GROSS WEIGHT ON X DIGITS
Valid values in the
nXX
format
608
TARE WEIGHT ON X DIGITS
Valid values in the
nXX
format
in which
n
can be:
0
Value with decimal point and spaces
1
Value with decimal point and zeros in the place of spaces
2
Value without decimal point and zeros in the place of spaces
XX
is the field length (maximum enterable value is 20); if the weight value is greater than the number of entered
digits, the complete value is printed anyways.
################
EXAMPLE
With a weight value of 100.01, if one wants a length of 10 characters, in the three cases one will have:
