3590EKR, 3590EXP, 3590EXT, 3590 EBOX, CPWE, CPWET series indicator E-AF03_05.01_14.07_EN_T.doc
122
If one needs to manage various printers using the available relays (connecting the transmission of the printer port
on the common of the relays), follow the example below:
PRINTING OF THE NET WEIGHT ON RELAY 1, GROSS ON RELAY 2, TARE ON RELAY’ 3.
…
620 >>> enter parameter 100 (Relay 1 ON)
620 >>> enter parameter 001 (Relay 2 OFF)
620 >>> enter parameter 002 (Relay 3 OFF)
301 (Net weight)
320 (Forces printing)
620 >>> enter parameter 000 (Relay 1 OFF)
620 >>> enter parameter 101 (Relay 2 ON)
620 >>> enter parameter 002 (Relay 3 OFF)
302 (Gross weight)
320 (Forces printing)
620 >>> enter parameter 000 (Relay 1 OFF)
620 >>> enter parameter 001 (Relay 2 OFF)
620 >>> enter parameter 102 (Relay 3 ON)
303 (Tare weight)
320 (Forces printing)
…
621
CONVERSION OF THE “.” (POINT) CHARACTER IN THE “,” (COMMA) CHARACTER
IN THE PREVIOUS X DIGITS
Values valid in the
XX
format
NOTE: if one uses the 621 block, one should enter the block 320 “FORCES PRINTING” before the blocks
that need to be converted.
################
EXAMPLE
…
320
(Forces printing)
301
(Net weight)
621 >>> parameter 20 (Conversion of the “.” (point) character in the “,” (comma)
….
The net weight value will be printed with the comma instead of with the point.
################
622
PRINTING OR CLEARING INPUT TEXT CONTENTS
Values valid in the
nXX
format
This macro allows to print a part of an input text content defined in the 614 macro or to clear the contents of the
input text content.
n
can be:
0
to print;
1
to clear.
XX
is the number of the input text (XX
= 01 to print or clear the text contents of input 0, XX=15 to print or clear the
contents of the text of input 14, XX=00 to clear all the contentx of the input texts).
623
SETTING THE ALIGNMENT AND NUMBER OF FORMATTING CHARACTERS
Values valid in the
nXX
format
This macro, followed by 624, allows to align to the right or to the left, the contents of the following macro in regards
to the defined number of characters.
n
can be:
0
to set the alignment to the right
1
to set the alignment to the left
