Digital Identification Solutions EDIsecure X ID 8300 Instruction Manual Download

Page: 10 / 61

Before Use

Options

Functions

●

Double-sided printer

Printer that supports double-sided printing.

●

Single-sided printer

Printer that supports single-sided printing.

Options

●

Warpage correction

Device for correcting card warpage after printing.

●

Magnetic encoder

Device for writing data to a magnetic stripe card.
Installation is applicable only for double-sided printer.

●

Contact IC encoder

Device for writing data to a contact IC card.

●

Non-contact IC encoder

Device for writing data to a non-contact IC card.

Operating the printer

●

"Operation Panel"

page 10

●

"Setting using the operation panel"

page 16

●

"Printing a Card"

page 25

Operation Panel

Name and functions of parts

①

Operation panel

●

Displays the mode settings, operating status, and error messages.

②

Status icon/operation button display

●

Displays the status icon or the function of the operation button during
mode setting.

③

Operation buttons

●

For selecting the operation button displayed on the operation panel.

Operation buttons

Resets the printer.

●

After clearing an error, press in the order of

［

Reset

］

Displays the setting mode mode.

Exits setting.

Displays the setting mode in the next lower level.

Confirms or executes a setting.

●

The display does not change if an item cannot be altered using the op-
eration panel.

Pressing it each time displays the next setting item.

Pressing it each time displays the next setting value.

Displays the settings change mode.

●

［

Change

］

is not displayed for an item, you can adjust the settings

on the status monitor of a PC.

Displays the scroll mode for the displayed characters.

Summary of Contents for EDIsecure X ID 8300






























































Search results

Summary of Contents for EDIsecure X ID 8300

Reviews:

Related manuals for EDIsecure X ID 8300

Brands by name

Popular brands

Digital Identification Solutions EDIsecure X ID 8300, Instruction Manual

Search results

Summary of Contents for EDIsecure X ID 8300

Reviews:

Related manuals for EDIsecure X ID 8300

Brands by name

Popular brands