54
Setup
4
Remove any slack in the film.
①
Hold the retransfer film cassette.
②
Turn the knob in the direction indicated by the arrow.
5
Insert the cassette all the way in along the guide rail until a “click”
sound is heard. Close the printer door.
Memo:
●
If the retransfer film cassette does not fit into the printer, turn on the
power of the printer with the printer door closed to cancel the transport
mode.
"Transport mode setting"
（
A
page 24
）
6
Press
［
Reset
］
DB
to reset the printer.
Memo:
●
When attaching a new retransfer film, it is recommended that you for-
ward the film by one or two images before printing.
"Initializing printer when attaching the cassette"
（
A
page 16
）
Setting Cards
Note:
●
Do not touch the printing surface of the card. Touching it may cause
printing errors. Put on the supplied gloves when handling the cards.
●
When using new cards, separate them one by one before setting them
in the printer. Cards may be adhered to each other due to static, thus
causing card jams.
●
Align the cards before setting them in the printer. Otherwise, the card
hopper cover may not close properly, and this may damage the printer.
●
Printing the card on the side with the magnetic stripe may cause print-
ing errors or damage to the card’s functions. If you want to do so, con-
sult our authorized dealers in advance.
●
To set cards with both functions (magnetic stripe and contact IC), fol-
low the procedure for setting the contact IC card.
Summary of Contents for EDIsecure X ID 8300
Page 14: ...14 Operation ...
Page 15: ...15 Operation ...
