Digital Identification Solutions EDIsecure X ID 8300 Instruction Manual Download

Page: 55 / 61

Setup

Set the card hopper knob to

［

OPEN

］

Lift to remove the card hopper cover.

Align the orientation of the cards, and set them in the printer.

Magnetic cards

●

Set the card with the magnetic stripe facing upward and toward
the printer, or facing downward and toward you.

Install the card hopper cover.

Adjusting Card Thickness

●

This printer can print cards with a thickness between 0.25 mm
and 1.00 mm.

This is adjusted to a thickness of 0.76 mm by default.

①

Set the card hopper knob to

［

LOCK

］

②

Remove the card hopper.

ISO contact IC cards

Set the card with the Contact IC terminal facing upward and toward
the rear of the printer, or downward and toward the front of the print-
er.

Summary of Contents for EDIsecure X ID 8300






























































Search results

Summary of Contents for EDIsecure X ID 8300

Reviews:

Related manuals for EDIsecure X ID 8300

Brands by name

Popular brands

Digital Identification Solutions EDIsecure X ID 8300, Instruction Manual

Search results

Summary of Contents for EDIsecure X ID 8300

Reviews:

Related manuals for EDIsecure X ID 8300

Brands by name

Popular brands