Digital Identification Solutions EDIsecure X ID 8300 Instruction Manual Download

Page: 59 / 61

Setup

Printer (Error Code:0x01040000-0x02000000)

No. Error Code

Description

Actions (Reference Page No.)

0x01044400

A hardware error has occurred.

Turn off and on the power again. If the same problem recurs, turn off

the power and consult our authorized dealers.

0x0104AB00 An error has occurred in the mechanical

component of the magnetic encoder.

0x0104AC00 A hardware error has occurred in the magnetic

encoder.

0x0104C100 A heating roller operation error has occurred.

0x0104C200 The temperature of the bend remedy heating

roller or retransfer heating roller is too high.

0x0104C300 An internal 24v instantaneous interruption is

detected.

0x0104D800 A hardware error has occurred during

initialization.

0x0104F000

The temperature of the retransfer heating roller is

too high.

0x0104F100

The retransfer heating roller is faulty.

0x0104F200

The thermistor of the retransfer heating roller is

faulty.

0x0104F300

The temperature of the bend remedy heating

roller is too high.

0x0104F400

The bend remedy unit is faulty.

0x0104F500

The thermistor of the bend remedy heating roller

is faulty.

0x0104F600

The operating ambient temperature of the printer

is too low.

Check the temperature. If the same problem recurs within the range of
operating ambient temperature, turn off the power and consult our
authorized dealers.

0x0104F800

The temperature of the thermal head is too high.

Turn off and on the power again. If the same problem recurs, turn off

the power and consult our authorized dealers.

0x0104

RRRR

A hardware error has occurred.

0x01051A00

Printer command is incorrect.

Please consult our authorized dealers.

0x01052000

0x01052100

A security key has already been set. A new

security key cannot be specified.

0x01052200

Entry does not match the preset security key.

0x01052300

Security key has not been specified. The security -

lock function is not enabled.

0x01052400

Printer command is incorrect.

Please consult our authorized dealers.

0x01052600

0x01052700

Ink ribbon specification is incorrect.

Ensure that the printer driver’s ink setting matches the installed ink ribbon.

(Printer Driver Manual page 26)

0x01052A00

Printer command is incorrect.

Please consult our authorized dealers.

0x01052B00

Magnetic encoding data is incorrect.

Check the card specifications.

0x01052C00 IC encoder is not installed.

0x01052D00 Magnetic encoder is not installed.

0x01052E00

Optional devices are not installed.

0x0105

RRRR

A command error has occurred.

Please consult our authorized dealers.

0x010B

RRRR

0x0142A200

Retransfer film has run out.

Replace with a new one. (

page 29)

0x0142B200

Ink ribbon has run out.

Replace with a new one. (

page 26)

Summary of Contents for EDIsecure X ID 8300






























































Search results

Summary of Contents for EDIsecure X ID 8300

Reviews:

Related manuals for EDIsecure X ID 8300

Brands by name

Popular brands

Digital Identification Solutions EDIsecure X ID 8300, Instruction Manual

Search results

Summary of Contents for EDIsecure X ID 8300

Reviews:

Related manuals for EDIsecure X ID 8300

Brands by name

Popular brands