Digital Identification Solutions EDIsecure X ID 8300 Instruction Manual Download

Page: 24 / 61

Operation

Transport mode setting

Note:

●

Make sure that you set to the transport mode when transporting or
moving the printer.
Failure to do so may result in malfunction of the printer.

●

When transporting or moving the printer, ensure that the heat roller is
secured to a safe position.

Open the printer door.

Press and hold down the cassette button, and remove the ink ribbon
cassette (on the right) to remove the ink ribbon.

Press and hold down the cassette button, and remove the retransfer
film cassette (on the left) to remove the retransfer film.

Close the printer door.

Turn on the power.

Check to ensure that

［

Film Search

］

is displayed on the operation

panel of the printer.

Press

［

］

●

A [Cleaning] message appears.

Press

［

］

to set to

［

Transport Mode

］

Press

●

After setting to the transport mode, a

［

Please Power Off

］

message

appears.

Turn off the power, and attach the cassette.

Note:

●

When in the transport mode, the retransfer film cassette cannot be in-
stalled to the printer with the retransfer film attached.

Reset the Transport mode

●

With the printer door closed. turn on the power, and reset the
transport mode.

Summary of Contents for EDIsecure X ID 8300






























































Search results

Summary of Contents for EDIsecure X ID 8300

Reviews:

Related manuals for EDIsecure X ID 8300

Brands by name

Popular brands

Digital Identification Solutions EDIsecure X ID 8300, Instruction Manual

Search results

Summary of Contents for EDIsecure X ID 8300

Reviews:

Related manuals for EDIsecure X ID 8300

Brands by name

Popular brands