Digital Identification Solutions EDIsecure X ID 8300 Instruction Manual Download

Page: 60 / 61

Setup

Printer Driver (Error Code:0x02000000-)

No. Error Code

Description

Actions (Reference Page No.)

0x02

RRRRRR

Printer is not found.

Check the printer connection.

0x0300274D Printer is not found.

Check the printer connection.

Printing using a USB-connected printer cannot
be performed via Ethernet (LAN) connection.

To print via Ethernet (LAN) connection, disconnect the USB cable from
the printer. (

page 56)

0x03

RRRRRR

Printer is not found.

Check the printer connection.

A communication error has occurred.

0x04

RRRRRR

A communication error has occurred.

Check the printer connection.

0x09

RRRRRR

A command error has occurred.

Check the computer settings.

0x10000103

An error has occurred during magnetic encoding

data writing.

Check the card specifications.

0x10000201

Contact IC encoding program is not found.

Please consult our authorized dealers.

0x10000202

Unable to establish communication with the

contact IC encoder.

0x10000203

An error has occurred during contact IC encoding

data writing.

Check the card specifications.

0x10000301

Non-contact IC encoding program is not found.

Please consult our authorized dealers.

0x10000302

Unable to establish communication with the non-

contact IC encoder.

0x10000303

An error has occurred during non-contact IC

encoding data writing.

Check the card specifications.

0x10000401

User program is not found.

Please consult our authorized dealers.

0x10000403

An error is returned for the user program.

0x10000501

Magnetic encoding program is not found.

0x10000503

An error has occurred during magnetic encoding

data writing.

Check the card specifications.

0x10000504

An error has occurred during magnetic encoding

data reading.

0x10000505

A magnetic encoding command error has

occurred.

Please consult our authorized dealers.

0x10000601

End notification program is not found.

0x10000603

An error is returned for the end notification

program.

0x10001001

Ink ribbon cannot be recognized.

Ensure that the printer driver’s ink setting matches the installed ink

ribbon.

(Printer Driver Manual page 26)

0x10001002

Ink ribbon specification is incorrect.

0x10001003

IC encoder is not installed.

0x10001004

Magnetic encoder is not installed.

0x10002000

Printer is not found.

Check the printer connection.

0x1000200

The printer is not ready.

Summary of Contents for EDIsecure X ID 8300






























































Search results

Summary of Contents for EDIsecure X ID 8300

Reviews:

Related manuals for EDIsecure X ID 8300

Brands by name

Popular brands

Digital Identification Solutions EDIsecure X ID 8300, Instruction Manual

Search results

Summary of Contents for EDIsecure X ID 8300

Reviews:

Related manuals for EDIsecure X ID 8300

Brands by name

Popular brands