31
Replacement
●
Do not touch the retransfer face (the side that faces outward when in-
stalled) with your hand. Touching it may cause printing errors. Put on
the supplied gloves when handling the retransfer film.
●
When handling the cassette, hold it with both hands. Accidentally drop-
ping the cassette may damage it or result in injuries.
●
When installing a used retransfer film, align the unused side of the film
with the arrow indicated on the label of the cassette. Failure to do so
may result in errors, or the print may turn out light.
●
Do not perform work on the printer door. Do not place heavy objects or
apply load on the printer. Doing so may damage it.
●
During replacement, clean the four bobbin holders on the printer. Burrs
generated by friction between the bobbins and bobbin holders may be
adhered to the ink ribbon or retransfer film, causing printing errors.
1
Open the printer door.
2
Press and hold down the cassette button, and pull out the retransfer
film cassette (on the left) to remove the retransfer film.
3
Cut away the broken portion, and attach the unused portion at the sup-
ply side to the other end at the take-up side using an adhesive tape.
4
Attach the retransfer film, and turn the take-up side until the cut section
is out of sight.
①
With the retransfer face facing outward, align the unused side of the
film with the arrow on the cassette, and unwind it along the three
shafts.
②
Insert the retransfer film firmly into the bobbin holders with the film
set to the far end of the guides.
③
Turn the knob in the direction of the arrow to remove any slack.
5
Insert the cassette all the way in along the guide rail until a “click”
sound is heard. Close the printer door.
6
Press
［
Reset
］
DB
to reset the printer.
Summary of Contents for EDIsecure X ID 8300
Page 14: ...14 Operation ...
Page 15: ...15 Operation ...
