46
Troubleshooting?
●
The card is discharged from the NG card outlet or card stacker.
Error code 92
●
Card jam in the magnetic encoder unit.
1
Open the printer door.
2
Restore the card to the magnetic encoder unit.
●
Use the jog dial to turn the cleaning unit.
3
Turn the jog dial at the turnover unit to adjust the unit to a vertical posi-
tion.
●
While doing so, make use of the printer’s label as a reference.
4
Move the card to the center of the turnover unit
①
Maintain the turnover unit in the vertical position.
②
Turn the jog dial at the cleaning unit.
●
Check to ensure that the card moves to the turnover unit.
5
Turn the jog dial attached to the turnover and cleaning units at the
same time in opposite directions.
●
Set the turnover unit to the horizontal position.
6
Turn the jog dial of the turnover unit clockwise to an angle of 45 de-
gree.
●
While doing so, make use of the printer’s label as a reference.
7
Turn the jog dial at the cleaning unit in the anti-clockwise direction.
●
The card is discharged from the NG card outlet.
8
Press
［
RESET
］
DB
to reset the printer.
Summary of Contents for EDIsecure X ID 8300
Page 14: ...14 Operation ...
Page 15: ...15 Operation ...
