30
Replacement
3
Install a new retransfer film.
●
Install while referring to the indication on the label of the cassette.
①
When installing the retransfer film, make sure that at least three
black lines are wound onto the take-up side.
②
With the retransfer face facing outward, align the unused side of the
film with the arrow on the cassette, and unwind it along the three
shafts.
③
Insert the retransfer film firmly into the bobbin holders with the film
set to the far end of the guides.
●
A: take-up side (black)
●
B: unused side (green)
4
Remove any slack in the film.
①
Hold the retransfer film cassette.
②
Turn the knob in the direction indicated by the arrow.
5
Insert the cassette all the way in along the guide rail until a “click”
sound is heard. Close the printer door.
6
Press
［
Reset
］
DB
to reset the printer.
Memo:
●
When attaching a new retransfer film, it is recommended that you for-
ward the film by one or two images before printing.
"Initializing printer when attaching the cassette"
（
A
page 16
）
Retransfer film is broken
●
Repair the retransfer film.
Print this page
Note:
●
If the security lock function is turned on, turn off the function from the
computer to unlock the printer. After closing the door, turn on the func-
tion again from the computer.
●
Stand the cassette on a flat surface as illustrated in the diagram. Avoid
doing so on a floor as dust attached to the retransfer film may cause
printing errors.
Summary of Contents for EDIsecure X ID 8300
Page 14: ...14 Operation ...
Page 15: ...15 Operation ...
