53
Setup
4
Remove any slack in the ink ribbon.
①
Hold the cassette.
②
Turn the knob in the direction indicated by the arrow.
5
Press
［
Reset
］
DB
to reset the printer.
Attaching the retransfer film
Note:
●
Stand the cassette on a flat surface as illustrated in the diagram. Avoid
doing so on a floor as dust attached to the retransfer film may cause
printing errors.
●
Do not touch the retransfer face (the side that faces outward when in-
stalled) with your hand. Touching it may cause printing errors. Put on
the supplied gloves when handling the retransfer film.
●
When handling the cassette, hold it with both hands. Accidentally drop-
ping the cassette may damage it or result in injuries.
●
When installing a new film, make sure that at least three black lines are
wound onto the take-up side. Insufficient winding may cause the printer
to malfunction.
●
Do not perform work on the printer door. Do not place heavy objects or
apply load on the printer. Doing so may damage it.
1
Open the printer door.
2
Press and hold down the cassette button, and pull out the retransfer
film cassette (on the left) to remove the retransfer film.
3
Install a new retransfer film.
●
Install while referring to the indication on the label of the cassette.
①
When installing the retransfer film, make sure that at least three
black lines are wound onto the take-up side.
②
With the retransfer face facing outward, align the unused side of the
film with the arrow on the cassette, and unwind it along the three
shafts.
③
Insert the retransfer film firmly into the bobbin holders with the film
set to the far end of the guides.
●
A: take-up side (black)
●
B: unused side (green)
Summary of Contents for EDIsecure X ID 8300
Page 14: ...14 Operation ...
Page 15: ...15 Operation ...
