Develop ineo+ 451, User Manual

Page: 48 / 526

2 Copy Operations
2-10 ineo+ 650/550/451
Turning off the machine
1
Press the [Power] (auxiliary power) key.
Check that the touch panel is turned off.
2
Open the main power switch cover, and then set the main
power switch to "
o ".
3
Close the main power switch cover.
2
Reminder
When the machine is turned off, then on again with the main power switch, wait at least 10 seconds to
turn the machine on after turning it off. The machine may not operate correctly if it is turned on
immediately after being turned off.
Do not turn off the machine with the main power switch or the [Power] (auxiliary power) key while it is
making copies or printing, otherwise a paper misfeed may occur.
Do not turn off the machine with the main power switch or the [Power] (auxiliary power) key while it is
scanning or sending or receiving data, otherwise all scan data or transmission data will be deleted.
Do not turn off the machine with the main power switch while a queued job or stored data is waiting to
be printed, otherwise the jobs will be deleted.
!
Detail
The following are cleared when the main power switch and [Power] (auxiliary power) key are turned off.
Settings that have not been programmed
Jobs queued to be printed
Manually conserving energy
The machine can be manually set to an energy conservation mode (Low Power mode or Sleep mode).
1
Press the [Power Save] key (or press the [Power] (auxiliary
power) key).
– As the factory default, the machine enters Low Power
mode.