Develop ineo+ 451, User Manual

Page: 89 / 526

ineo+ 650/550/451 2-51
Copy Operations 2
The following procedures describe how to select Finishing settings.
2
Reminder
The Staple settings are available only if the optional finisher is installed.
The Punch settings are available only if the punch kit is installed on the optional finisher.
Separating copies by sets ("Sort" setting)
0 As the factory default, "Group" is selected.
0 If finisher FS-519 is installed, the output tray can be selected. For details, refer to"Selecting the output
tray" on page 2-53.
0 If offset sorting is selected while no finisher is installed, printed copies will be fed out and sorted in an
alternating
w and v pattern if the following conditions are met.
A4- or B5-size paper is used.
Paper of the same size and type is loaded with the
w orientation in one paper tray and with the v
orientation in another tray.
The "Auto" Paper setting is selected.
The "Auto" Paper setting is not selected when the "Mixed Original" setting is selected.
0 If offset sorting is selected while a finisher is installed, printed copies are fed out and stacked on top of
each other with each set shifted to separate it.
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Touch [Sort].
– To separate each set of copies, touch [Yes] under "Offset".
3
Touch [OK].
The Basic screen appears again.