Develop ineo+ 451 User Manual Download Page 519

Page: 519 / 526

ineo+ 650/550/451

9-5

Appendix

To type text

Touch the button for the desired character from the keyboard that appeared.
–

To type in uppercase letters or symbols, touch [Shift].

–

Numbers can also be typed in with the keypad.

The entered characters appear in the text box.

Note

To revert to the setting when the keyboard was displayed, touch [Cancel].

To clear all entered text, press the [C] (clear) key.

Some buttons may not appear, depending on the characters being entered.

Detail

To change a character in the entered text, touch

and

to move the cursor to the character to

be changed, touch [Delete], and then type in the desired letter or number.

List of available characters

Type

Characters

Alphanumeric charac-
ters/symbols

Summary of Contents for ineo+ 451















































































































































































































































































































































































































































































































































Search results

Summary of Contents for ineo+ 451

Reviews:

Related manuals for ineo+ 451

Brands by name

Popular brands

Develop ineo+ 451, User Manual

Search results

Summary of Contents for ineo+ 451

Reviews:

Related manuals for ineo+ 451

Brands by name

Popular brands