Develop ineo+ 451 User Manual Download Page 344

Page: 344 / 526

Network Scanner Operations

5-14

ineo+ 650/550/451

Touch [Group].

The destinations registered as groups appear.

Touch the button for the group destination.

A list of destinations registered in the group appears.

Select the destination where the data is to be sent, and then touch [OK].

–

To select all destinations, touch [Select All].

–

To deselect all destinations, touch [Reset].

–

Additional destinations can be added by directly typing in the address.

The button appears selected, and the destination appears under "Broadcast Destinations".

Touch [Scan Settings], [Original Settings] or [Communication Settings], and then specify the desired
scan settings.

–

For details on the scan settings, refer to "Specifying scan and transmission settings (Scan
settings/original settings/communication settings)" on page 5-28.

Load the document into the ADF or place it on the original glass.

Summary of Contents for ineo+ 451















































































































































































































































































































































































































































































































































Search results

Summary of Contents for ineo+ 451

Reviews:

Related manuals for ineo+ 451

Brands by name

Popular brands

Develop ineo+ 451, User Manual

Search results

Summary of Contents for ineo+ 451

Reviews:

Related manuals for ineo+ 451

Brands by name

Popular brands