Develop ineo+ 451, User Manual

Page: 463 / 526

ineo+ 650/550/451 7-5
Fax Operations (Option) 7
6
Specify the recipient’s fax number.
– For details on procedures for specifying a fax number, refer to "Specifying only one destination" on
page 7-12 and "Specifying multiple destinations (Sequential broadcast transmission or broadcast
transmission)" on page 7-17.
– The destination can be specified in any of the following ways.
Address Book
Direct Input
Group destination
Program destination
– To cancel a selected destination, re-select the destination you wish cancel.
– Entered numbers and selected settings are all cleared by pressing [Reset] key.
– When [Manual Destination Input] is forbidden, the [Direct Input] tab will not be displyed.
– Recepient fax numbers can be specified more easily by registering the recipient’s fax number to the
Address Book, Group destinations, or Program destinations.
Entered destinations are displayed in the Broadcast Destinations list in the left panel of the screen.
7
Press [Start] key.
– The following screen is displayed when the TX Result Report Check screen is set to display. The TX
Result Report is printed by touching [Yes].
– When the Destination Check Display Function is set, the Destination Settings screen is displayed.
Confirm that the destination is correct and touch [Send].
– To abort tranmission of a fax, press [Stop] key.
– If the fax could not be sent, a TX Result Report is printed (when the machine has been set to print
a TX Result Report). And, it can be set such that the TX Result Report Check screen is displayed so
as to enable the selection of whether or not to output the transmission result report screen for every
transmission.
Scanning of the original begins, and the original is sent.