Develop ineo+ 451, User Manual

Page: 231 / 526

ineo+ 650/550/451 3-51
Print Operations 3
3.14 Page setup (PPD driver for Mac OS X)
Page attributes (basic settings)
1
Select "Page Setup" or "Paper Setup" from the [File] menu.
2
Select "Page Attributes".
3
Specify settings for the following:
– Paper Size: Specifies the paper size.
– Orientation: Specifies the orientation.
– Scale: Specifies the enlargement and reduction ratio.
2
Note
"12 × 18" paper size is one size larger than A3 paper size at 504.8 × 457.2 mm.
To print on paper sizes other than the standard sizes, be sure to set the custom paper sizes in Custom
Page Sizes first.
When "W" is selected for each standard paper size from the printer driver, the data can be centered
and printed.
For example, if A4 size data is created and you want to center and print on A3 size paper, select "A4W"
as the paper size and "Tray 1" or "Bypass Tray" as the paper tray from the printer driver.
To print, load A3 size paper in the tray ("Tray 1" or "Bypass Tray") of this machine that is specified from
the printer driver, and then specify the settings described below from [Basic (Paper)] – [Change Tray
Settings] – [Wide Paper] in the control panel.
Select "A4W".
Enter the A3 paper size (420.0
e 297.0) in [Change Size].