Delta CP2000 Series, User Manual

Page: 812 / 868

Chapter 16 PLC Function Applications
│
CP2000
16-129
API
WPRA
S1 S2
Drive parameters write-in
323
P
Bit device Word device 16-bit command (5 STEP)
WORA Continuous
execution type
WORAP Pulse
execution type
32-bit command
－ － － －
Flag signal: none
X Y M K H KnX KnY KnM T C D
S1
＊ ＊ ＊
S2
＊ ＊ ＊
Notes on operand usage: none
S1
: Data that is going to write in
S2
: Parameter address of the write-in data
 Read the data of CP2000 drive’s parameter H01.00 and write into D0, read data
of H01.01 and write into D1.
 When M0 is ON, write the content of D10 into CP2000 drive’s Pr.04-00 (1 st step
speed frequency).
 When parameter writes-in successfully, M1017 is ON.
 The WPR command does not support the write-in of 20XX address, but the RPR
command supports the read-out of 21XX and 22XX.
 When WPRA executes, the data is only written into the RAM area, and will get
back to previous record when the power is off.