Delta CP2000 Series, User Manual

Page: 430 / 868

Chapter 12 Description of Parameter Settings

CP2000
12.1-03-17
Signal Loss Selection for Analog Input 4–20 mA
Default: 0
Settings 0: Disable
1: Continue operation at the last frequency
2: Decelerate to 0 Hz
3: Stop immediately and display ACE
 Determines the response when the 4–20 mA signal is lost, when AVIc (Pr.03-28=2) or ACIc
(Pr.03-29=0).
 When Pr.03-28 is not set to 2, the voltage input to AVI1 terminal is 0–10 V or 0–20 mA, and the
Pr.03-19 is invalid.
 When Pr.03-29 is not set to 0, the voltage input to ACI terminal is 0–10 V, and the Pr.03-19 is
invalid.
 When the setting is 1 or 2, the keypad displays the warning code “ANL”. It keeps blinking until the
ACI signal is recovered.
 When the setting is 3, and the ACI terminal is disconnected, the keypad displays “ACE” error. It
keeps blinking until the connection is recovered and the error is reset.
 When the motor drive stops, the warning condition does not continue to exist, so the warning
disappears.

Multi-function Output 1 (AFM1)
 Multi-function Output 2 (AFM2)
Default: 0
Settings 0–23
Function Chart
Settings Functions Descriptions
0 Output frequency (Hz) Maximum frequency Pr.01-00 is regarded as 100%.
1 Frequency command (Hz) Maximum frequency Pr.01-00 is regarded as 100%.
2 Motor speed (Hz) Maximum frequency Pr.01-00 is regarded as 100%
3 Output current (rms) (2.5 X rated current) is regarded as 100%
4 Output voltage (2 X rated voltage) is regarded as 100%
5 DC bus Voltage 450V (900V)=100%
6 Power factor -1.000–1.000=100%
7 Power Rated power is regarded as 100%
9 AVI1 percentage 0–10 V / 0–20 mA / 4–20 mA =0–100%
10 ACI percentage 4–20 mA / 0–10 V / 0–20 mA =0–100%
11 AVI2 percentage 0–10 V = 0–100%
20 CANopen analog output
CANopen communication analog output
Terminal
Corresponding
address
AFM1 2026-A1
AFM2 2026-A2
AO10 2026-AB
AO11 2026-AC