Delta CP2000 Series, User Manual

Page: 464 / 868

Chapter 12 Description of Parameter Settings

CP2000
12.1-06-16
Capacitance Temperature at Malfunction
Default: Read only
Settings -3276.7–3276.7°C
 When a malfunction occurs, check the current capacitance temperature. If it happens again, it
overwrites the previous record.
Motor Speed in rpm at Malfunction
Default: Read only
Settings -32767–32767 rpm
 When a malfunction occurs, check the current motor speed in rpm. If it happens again, it
overwrites the previous record.
Status of Multi-function Input Terminal at Malfunction
Default: Read only
Settings 0000h–FFFFh
Status of Multi-function Output Terminal at Malfunction
Default: Read only
Settings 0000h–FFFFh
 When a malfunction occurs, check the status of multi-function input / output terminals. If it
happens again, it overwrites the previous record.
Drive Status at Malfunction
Default: Read only
Settings 0000h–FFFFh
 When a malfunction occurs, check the current drive status (communication address 2101H). If it
happens again, it overwrites the previous record.
 STO Latch Selection
Default: 0
Settings 0: STO latch
1: STO no latch
 Pr.06-44=0: STO Alarm latch. After you clear the cause of the STO Alarm, use a Reset command
to clear the STO Alarm.
 Pr.06-44=1: STO Alarm no latch. After you clear the cause of the STO Alarm, the STO Alarm
clears automatically.
 All of STL1–STL3 errors are “Alarm Latch” mode (in STL1–STL3 mode, the Pr.06-44 function is
no effective).
 Treatment to Output Phase Loss (OPHL)
Default: 3
Settings 0: Warn and continue operation
1: Fault and ramp to stop
2: Fault and coast to stop
3: No warning