Delta CP2000 Series, User Manual

Page: 545 / 868

Chapter 12 Description of Parameter Settings

CP2000
12.1-12-17
Clear Motor’s Operation Time
Default: 0
Settings 0: No function
1: Clear operation time for motor 1
2: Clear operation time for motor 2
3: Clear operation time for motor 3
4: Clear operation time for motor 4
5: Clear operation time for motor 5
6: Clear operation time for motor 6
7: Clear operation time for motor 7
8: Clear operation time for motor 8
10: Clear operation time for all motors
 Clear the operation time for single motor or all motors as needed.
 1: The operation time for Motor 1 returns to zero, including operation records in Pr.12-11 (hour)
and Pr.12-10 (min. /sec.).
 10: The operation time for Motor 1–8 (Pr.12-10–Pr.12-25) all return to zero.
Priority for Circulated Operation
Default: 0
Settings 0: Terminal order
1: Minimum operation time
 Terminal order: the multi-function output terminals corresponded to each circulation control mode
(Pr.12-00=1–5).
 Minimum operation time: starts in the order from the motor with the minimum operating hours
among all running motors.
 The minimum operation time is only applicable for operation time record under fixed time
circulation mode (Pr.12-00=1), as listed in the circulation mode comparison table below.
 A comparison for each circulation mode
Function / Circulation Control Mode Pr.12-00=1 Pr.12-00=2–5
Motor operation time record v v
Terminal order v v
Minimum operation time v* x
* When the drive resumes and starts running after stopping (or turning off) after operating for a
period of time, the motor operates according to the minimum operation time. However, the first
operating motor after resuming is the previous running motor before stop or turn-off. If you need
to start the motors according to the minimum operation time in sequence immediately after
resuming, close the minimum operation time (Pr.12-27=0) first and start (Pr.12-27=1) again.

When Pr.12-00=1–5, the terminal order (Pr.12-27=0) is applicable for the operation time record
under all the circulated control modes.

When Pr.12-00=1–5, the terminal order (Pr.12-27=0) is the only available selection, and the
minimum operation time (Pr.12-27=1) is invalid.