Delta CP2000 Series, User Manual

Page: 296 / 868

Chapter 10 Digital Keypad

CP2000
10-15
To begin copying parameters until it is done.
When copying parameters is completed, keypad will
automatically be back to this screen.
Press Right key to see the date of copying
parameters.
Press Right key to see the time of copying
parameters.
12. Display setup
Press to setting menu.
1. Contrast
Use Up / Down key to adjust the setting value.
After selecting a setting value. Press ENTER to
see screen’s display after contrast is adjusted to
be +10.
When the setting value is 0 Min, the backlight
will be steady on.
Then press ENTER.
After select a setting value Press ENTER to see
screen’s display result after contrast is adjusted
to be -10.
2. Back-light
Press ENTER to go to “Back Light Time Setting”
screen.
Use Up / Down key to adjust the setting value.
When the setting value is 0 Min, the backlight
will be steady on.