Dell XPS M2010 Service Manual Download Page 36

Page: 36 / 131

Seat the computer base onto the hinge arms, aligning the screw holes in the computer base with those in the hinge arms.

10.

Attach the right and left hinge arms to the base using six M2.5 x 8-mm screws.

11.

Connect the solenoid cable to the solenoid card. Thread the cable through the notch and under the frame as shown below.

12.

Replace the video card/thermal-cooling assembly (see

Replacing the Video Card/Thermal-Cooling Assembly

13.

Replace the right hard drive (see

Replacing a Hard Drive

14.

Replace the right fan (see

Replacing a System Fan

15.

Replace the top cover (see

Replacing the Top Cover

16.

Replace the cosmetic covers (see

Replacing the Cosmetic Covers

17.

Firmly reattach the keyboard to the computer and close the display (see

Closing the Display

18.

Turn the computer upside down.

19.

Connect the antenna cables from the mini card.

20.

Connect the speaker cable to the connector on the system board (JSPK).

21.

Connect the suspend and solenoid function cable to the connector on the system board (JHING).

22.

Connect the infrared sensor cable to the connector on the system board (JCIR).

23.

Replace the memory module cover (see

Replacing the Memory Module

24.

Replace the system battery (see

Replacing the System Battery

Back to Contents Page

opening on the base

solenoid cable

solenoid card

NOTICE:

Ensure that you attach the keyboard securely to avoid damage to the keyboard.

Summary of Contents for XPS M2010




































































































































Search results

Summary of Contents for XPS M2010

Reviews:

Related manuals for XPS M2010

Brands by name

Popular brands

Dell XPS M2010, Service Manual

Search results

Summary of Contents for XPS M2010

Reviews:

Related manuals for XPS M2010

Brands by name

Popular brands