manualshive.com logo in svg

Dell XPS M2010, Service Manual, Page: 75 / 131

Share
Download
Dell XPS M2010 Service Manual Download Page 75

 

 

10.

Connect your computer and devices to electrical outlets, and then turn them on.  
 

See the documentation that came with the drive for instructions on installing any software required for drive operation. 

 

 

11.

Enter system setup (see 

Entering System Setup

), and select the appropriate 

Diskette Drive 

option.  

 

 

Media Card Reader  

 

 

 

 

Removing a Media Card Reader 

 

 

1.

Follow the procedures in 

Before You Begin

.  

 

 

  

2.

Remove the computer cover (see 

Removing the Computer Cover

).  

 

 

  

3.

Remove the drive panel (see 

Removing the Drive Panel

).  

 

 

  

4.

Disconnect the power and data cables from the back of the Media Card Reader.  
 

  

 

 

5.

Slide the drive-release latch towards the base of the computer to release the shoulder screw, and then slide the media card reader out of the drive bay. 
 
 

  

 

CAUTION: 

Before you begin any of the procedures in this section, follow the safety instructions in the 

Product Information Guide

.

1 

media card reader power cable 

2 

system board connector 

Summary of Contents for XPS M2010




































































































































Reviews:

No comments