Dell XPS M2010 Service Manual Download Page 32

Page: 32 / 131

Removing the LCD Panel

Follow the instructions in

Before Working Inside Your Computer

, including removing the system battery.

With the computer still turned over, remove the memory module cover (see

Removing the Memory Module Cover

Disconnect the cables for the speakers, suspend and solenoid function, and infrared sensor from the system board connectors, and unhook the cables
from the routing hook.

Disconnect the mini card antenna cables from the mini card, and unhook the cables from the routing hooks.

Turn the computer over and open the display (see

Opening the Display

Detach the keyboard by grasping the sides of the keyboard and pulling it straight out from the computer base. Set the keyboard aside.

Remove the cosmetic covers (see

Removing the Cosmetic Covers

Remove the top cover (see

Removing the Top Cover

Remove the right fan (see

Removing a System Fan

10.

If your computer has two hard drives, remove the right hard drive (see

Removing a Hard Drive

11.

Disconnect the video cable from the video card and remove the video card/thermal-cooling unit (see

Removing the Video Card/Thermal-Cooling

Assembly

NOTICE:

To help prevent damage to the system board, remove the main battery before working inside the computer.

1 speaker cable

2 infrared sensor cable

3 suspend and solenoid

function cable

4 mini card antenna

cables

5 routing hooks for the antenna

cables

6 routing hook

Summary of Contents for XPS M2010




































































































































Search results

Summary of Contents for XPS M2010

Reviews:

Dell XPS M2010, Service Manual, Page: 32 / 131

Search results

Summary of Contents for XPS M2010

Reviews: