Dell XPS M2010 Service Manual Download Page 51

Page: 51 / 131

Back to Contents Page

Modem

Dell™ XPS™ M2010 Service Manual

Removing the Modem

Replacing the Modem

Removing the Modem

Follow the instructions in

Before Working Inside Your Computer

, including removing the system battery.

Turn the computer over and open the display (see

Opening the Display

Detach the keyboard by grasping the sides of the keyboard and pulling it straight out from the computer base. Set the keyboard aside.

Remove the cosmetic covers (see

Removing the Cosmetic Covers

Remove the top cover (see

Removing the Top Cover

Remove the hard drive(s) (see

Removing a Hard Drive

Remove the system fans (see

Removing a System Fan

Remove the video card/thermal-cooling assembly (see

Removing the Video Card/Thermal-Cooling Assembly

Remove the processor thermal-cooling assembly (see

Removing the Processor Thermal-Cooling Assembly

10.

Remove the frame (see

Removing the Frame

11.

Remove the two M2 x 3-mm screws that attach the modem to the system board.

12.

Pull up on the pull-tab to disconnect the modem from the connector on the system board.

13.

Disconnect the modem cable from the modem.

CAUTION:

Before you begin the following procedure, follow the safety instructions in the

Product Information Guide

NOTICE:

To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your

computer's electronic components. You can do so by touching an unpainted metal surface. If you leave the area, ground yourself again when you return
to the computer.

NOTICE:

To help prevent damage to the system board, you must remove the main battery before you begin working inside the computer.

NOTICE:

Do not disconnect the modem cable from the system board.

system board connector

M2 x 3-mm screws (2)

pull-tab

modem

modem cable

Summary of Contents for XPS M2010




































































































































Search results

Summary of Contents for XPS M2010

Reviews:

Dell XPS M2010, Service Manual, Page: 51 / 131

Search results

Summary of Contents for XPS M2010

Reviews: