Dell XPS M2010, Service Manual

Page: 114 / 131

NOTE: This feature does not work if you turn off your
computer using a power strip or surge protector.
Auto Power Time Specifies the time to automatically turn on the
computer.
Change the time to automatically turn on the
computer by pressing the up- or down-arrow key to
increase or decrease the numbers, or type the
numbers in the appropriate time field.
NOTE: This feature does not work if you turn off your
computer using a power strip or surge protector.
Suspend Mode
( S3 default)
Specifies the power management suspend mode.
l
S1 — The computer resumes more quickly from
sleep mode.
l
S3 — The computer conserves more power
when not in use (system memory remains
active).
Maintenance
Service Tag Displays the system service tag.
Load Defaults This setting restores the computer's factory-installed
default settings.
l
Cancel — Do not restore factory-installed
default settings.
l
Continue — Restore factory-installed default
settings.
Event Log Displays the system event log.
l
Mark all entrie s — Mark all event log entries
as read (R).
l
Clear log — Clear all event log entries.
NOTE: Once an event log entry is marked as read (R)
that entry cannot be marked as unread (U).
POST Behavior
Fastboot
( On default)
Enables or disables the option to speed up the boot
process by skipping some compatibility tests.
l
Off — Do not skip any steps in the boot
process.
l
On — Boot quickly.
Numlock Key
( On default)
Enables or disables the numerical and mathematical
features of the rightmost bank of keys on the
keyboard.
l
Off — Right keypad keys function as arrows.
l
On — Right keypad keys function as numbers.
POST Hotkeys
( Setup & Boot Menu default)
Specifies the function keys to display on the screen
when the computer starts.
l
Setup & Boot Menu — Display both messages
(F2=Setup and F12=Boot Menu).
l
Setup — Display the setup message only
(F2=Setup).
l
Boot Menu — Display the Quickboot message
only (F12=Boot Menu).
l
None — Neither message is displayed.
Keyboard Errors
( Report default)
Enables or disables keyboard error reporting when
the computer starts.
l
Report — Display any keyboard errors.
l
Do not report — Do not display any keyboard
errors.