Dell Latitude CPx H Series User Manual Download Page 35

Page: 35 / 172

The Dell Latitude CPx H-Series/J-Series does not support some memory modules from older models of

Dell portable computers, such as the Latitude CP, XP, XPi CD, or LM. The H-Series only supports
SDRAM modules and does not support EDO memory modules.

Battery performance features such as charge time and life span can vary according to the conditions

under which the computer and battery are used.

Weights are shown with a hard-disk drive, a battery in the battery bay, and a travel module, diskette

drive, or a CD-ROM drive in the modular bay. Your computer might weigh more or less, depending on its
configuration.

Measured with the hard-disk drive in head-parked position.

Back to Contents Page

Summary of Contents for Latitude CPx H Series













































































































































































Search results

Summary of Contents for Latitude CPx H Series

Reviews:

Related manuals for Latitude CPx H Series

Brands by name

Popular brands

Dell Latitude CPx H Series, User Manual

Search results

Summary of Contents for Latitude CPx H Series

Reviews:

Related manuals for Latitude CPx H Series

Brands by name

Popular brands