Dell Latitude CPx H Series User Manual Download Page 112

Page: 112 / 172

3. Click the

Start

button, point to

Settings

, and then click

Control Panel

4. Double-click the

System

icon.

The

System Properties

dialog box appears.

5. Click the

Device Manager

tab.

6. Click the

View Devices by Type

button.

7. Click the plus sign to the left of the

Ports

icon.

The names of various device ports appear beneath the

Ports

icon.

8. Click

Infrared Serial (COM) Connections Port

, and then click

Properties

The

Infrared Serial (COM) Connections Port Properties

dialog box appears.

9. Click

the

Driver

tab

and

Update Driver

The

Update Device Driver Wizard

appears.

10. Click the

Yes (Recommended)

button, and then click

Next

The system searches for the drivers on the CD you inserted in step 2.

11. To complete the installation, follow the instructions on your display .

12. After the driver is updated, close the

Device Manager

and open

Windows Explorer

13. With the CD still in the drive, click

drive

, where

is the CD-ROM drive.

14. Right-click the

smcirlap.inf

file.

A pop-up menu appears.

15. Click

Install

The

smcirlap.inf

file is installed.

16. Restart your computer to activate the infrared drivers.

Installing System Utilities

System utilities let you configure features such as the asset tag code and suspend-to-disk partition. To copy
the system utilities to your hard-disk drive, perform the following steps.

NOTE: You can also run the system utilities directly from the

System Software CD.

1. Insert the

System Software

CD into the drive.

Summary of Contents for Latitude CPx H Series













































































































































































Search results

Summary of Contents for Latitude CPx H Series

Reviews:

Related manuals for Latitude CPx H Series

Brands by name

Popular brands

Dell Latitude CPx H Series, User Manual

Search results

Summary of Contents for Latitude CPx H Series

Reviews:

Related manuals for Latitude CPx H Series

Brands by name

Popular brands