Dell Latitude CPx H Series User Manual Download Page 117

Page: 117 / 172

9. After the files are copied to your hard-disk drive, click

Finish

to restart your computer.

After installing the video drivers and restarting your computer, perform the following steps to set the display
parameters.

1. Click the

Start

button, point to

Settings

, and then click

Control Panel

The

Control Panel

window appears.

2. Double-click the

Display

icon.

The

Display Properties

window appears.

3. Click the

Settings

tab.

4. Change the

Colors

option to

True Color (24 bit)

5. Set the

Screen

area for your display to the appropriate size.

6. Click

Apply

Installing the Power Management Utility

Dell provides a power management utility that helps you conserve battery power and view available power
levels. To install the power management utility, perform the following steps:

1. Save your work in all open application programs, because you will need to restart your computer at the

end of this procedure to complete the installation.

2. Insert the Dell

System Software

CD into the the CD-ROM drive.

3. Click the

Start

button, and then click

Run...

The

Run

dialog box appears.

4. Click the

Browse

button.

5. Select the appropriate drive for your CD-ROM.

6. Locate the

setup.exe

file for the power management utility for your specific operating system. For

example, if you want to install power management utilities for a system running Windows NT, look
under \winNT\powermgt\setup.

7. Follow the instructions on the display.

8. When prompted, restart your computer to activate the utility.

Installing Softex Docking Services

Summary of Contents for Latitude CPx H Series













































































































































































Search results

Summary of Contents for Latitude CPx H Series

Reviews:

Related manuals for Latitude CPx H Series

Brands by name

Popular brands

Dell Latitude CPx H Series, User Manual

Search results

Summary of Contents for Latitude CPx H Series

Reviews:

Related manuals for Latitude CPx H Series

Brands by name

Popular brands