Dell Latitude CPx H Series User Manual Download Page 136

Page: 136 / 172

Hard-disk Drive Password(s)

System Primary Password

System Modular Bay Password

Dock Media Bay Password

Hard-disk drive password(s

) displays the current status of the primary hard-disk drive password and

allows you to assign or change this password. You can set a primary password for the system, the system
modular bay, and the dock media bay.

Settings for this option are:

Disabled

(the default) — Indicates that no password is assigned

Enabled

— Indicates that a password is currently assigned

NOTICE:

The password features provide a high level of security for the data in your computer.

However, they are not foolproof. If your data requires more security, you should obtain and use
additional forms of protection, such as data encryption programs or PC Cards with encryption
features.

Infrared Data Port

allows you to avoid resource conflicts by remapping the address of the infrared ports or

disabling the port. The

COM1

COM2

COM3

, and

COM4

settings allow you to take advantage of the

computer's Fast IR support.

NOTE: Before you enable infrared driver support, you must enable the

Infrared Data Port

option by

selecting a COM setting (

COM3

is recommended). You must also set the

Infrared Mode

option to

either

Fast IR

Slow IR

Settings for this option are:

Disabled

(the default) — Disables the infrared data port and makes the direct memory access (DMA),

interrupt request (IRQ), and I/O resources available for another serial device to use

COM1

— Maps the infrared data port to COM1

COM2

— Maps the infrared data port to COM2

COM3

— Maps the infrared data port to COM3

COM4

— Maps the infrared data port to COM4

For a change in the

Infrared Data Port

option to take effect, you must reboot your computer.

Summary of Contents for Latitude CPx H Series













































































































































































Search results

Summary of Contents for Latitude CPx H Series

Reviews:

Related manuals for Latitude CPx H Series

Brands by name

Popular brands

Dell Latitude CPx H Series, User Manual

Search results

Summary of Contents for Latitude CPx H Series

Reviews:

Related manuals for Latitude CPx H Series

Brands by name

Popular brands