Dell Latitude CPx H Series User Manual Download Page 53

Page: 53 / 172

Figure 2. Removing a PC Card

To protect the PC Card connectors, install a blank if you are not going to use the connector.

Configuring PC Cards

The PC Card configuration utility performs the following functions:

Notifies you whenever a PC Card is inserted and tells you how the card is configured

Automatically loads the proper device driver if it is available on the hard-disk drive

If drivers are not available on the hard-disk drive, prompts you to install them using the device driver
diskette that came with the card

The operating system automatically detects a PC Card and opens the

Add New Hardware

menu from the

Control Panel

. For more information, see the PC Card operating system documentation.

Back to Contents Page

Summary of Contents for Latitude CPx H Series













































































































































































Search results

Summary of Contents for Latitude CPx H Series

Reviews:

Related manuals for Latitude CPx H Series

Brands by name

Popular brands

Dell Latitude CPx H Series, User Manual

Search results

Summary of Contents for Latitude CPx H Series

Reviews:

Related manuals for Latitude CPx H Series

Brands by name

Popular brands