Dell Latitude CPx H Series User Manual Download Page 39

Page: 39 / 172

Save your work and close all open files and application programs.

Turn your computer off.

If the computer is docked, undock it.

If the modular bay contains a device, remove the device as follows:

Close the computer display and turn the computer over.

Slide the modular bay latch toward the

Unlock

icon.

Keep holding the modular bay latch with one hand while pulling the device out of the bay with the
other hand.

After you remove the device, release the modular bay latch.

Slide the new device firmly into the modular bay.

You should hear a click when the device is fully seated.

Dock the computer if necessary.

Turn on the computer.

Back to Contents Page

Summary of Contents for Latitude CPx H Series













































































































































































Search results

Summary of Contents for Latitude CPx H Series

Reviews:

Related manuals for Latitude CPx H Series

Brands by name

Popular brands

Dell Latitude CPx H Series, User Manual

Search results

Summary of Contents for Latitude CPx H Series

Reviews:

Related manuals for Latitude CPx H Series

Brands by name

Popular brands